Medical Support Products

e360 Ventilator

Item # E360S-US-NA: Ventilator
Item # CRT360A: Ventilator Cart

Pediatric to Adult Ventilator with ease-of-use setup. Features noninvasive ventilation in all modes, 1000 event history, automatic leak compensation, volume target pressure control and pressure support and automated self diagnostics and circuit check.
Lowest cost of ownership in its class.
Built-in flow sensor

Newport C230 Air Compressor

Item # C230-115V-60

The ideal air source for all Newport Ventilators. The C230 Air Compressor features include:

• 200 L min flow capability
• large drying system for cool, condensation-free air
• easy access for maintenance and serving
• humidifier mounting on either side of compressor
• quick connect for central gas system

HT50 Subacute, Transport, Homecare Ventilator

Item # HT50-H1-B: without humidifier
Item # HT460700: Air Entrainment Mixer
Item # BCD43811P: Disposable Circuit (Pack-10/case)

This is the ventilator you've been waiting for - compact, lightweight, unsurpassed reliability, and self contained. Its comprehensive, versatile features meet the demands of almost any healthcare setting. Suitable for both pediatric ≥10 kg and adult patients, it's easy to use and inexpensive to maintain.
Weighs 15 lbs
Estimated battery life of Lead Acid Battery - up to 10 hours
Give freedom back to your patients with this ventilator!
View HT50 Interactive Product Guide Demo
Ventilator Specifications

pNeuton Transport/MRI Ventilator

Item #20052: Model A with Disconnect Alarm
Item #20002: Model S without Disconnect Alarm
Item #21001: Mobile MRI Stand w/ Dual E Tank Holder
Item #58001: Circuit Ped/Adult 6' (Pack-15/case)
Item #58051: Circuit Ped/Adult 8' (Pack-15/case)

• All pneumatic operation, no batteries or external power needed to provide ventilation.
• Low spontaneous work of breathing compared to other transport ventilators helps your patients' breathe easier.
• Built-in CPAP/PEEP system with automatic sensitivity for changing patient needs means no need for external CPAP valves.
• Switch from mask to ET Tube ventilation and CPAP to full support easily and seamlessly without interruption.
• Mandatory and spontaneous breaths at 100% or use 65% to prolong your oxygen tanks.
• MRI compatible so you can meet patient needs in your special procedure areas.
• An alarm system that warns you of patient disconnections or low gas supply.
• An optional NBC filter that allows use in hazardous environments

MaxO2 Vent™

Item # R213P19

The MaxO2 Vent™ - MRI compatible, low cost, and smaller than a toaster which makes it great for transport. Pneumatically powered, single-circuit, volume-consistent, time-cycled and inspiratory flow variable. The MaxO2 Vent™ utilizes a high-pressure drive with regulated, high internal resistance to control pressure and is considered a non-constant pressure generator. Simultaneously, the MaxO2 Vent™ produces a flow pattern that is constant in spite of changes in lung mechanics (inspiratory square-wave). Originally designed, tested and utilized for military fieldwork, the MaxO2 Vent™ can be used in virtually any demanding environment such as In-Hospital Transport, Air-Mobile Operations, Special Treatment Areas, Operating and Recovery Rooms, Animal Laboratories and Veterinary Medicine. Comes with one reusable circuit and IMV bag system.
For additional information, see maxo2vent.html

MaxO2 Vent™ with Disposable Hudson Circuit

Item #1560: Hudson Disposable Circuit

pNeuton S Transport Ventilator with CPAP

Item # 20002

Designed for Emergency Medical Professionals
-Face mask CPAP, mask pressure ventilation or volume ventilation with ET-Tube
-Enchanced oxygenation during transport
-Ground or air transport
-Pneumatic design and built tough
-MRI compatible

For patient circuit information, please see ventilator supplies

Next Generation Mask CPAP System

Item # 20201

For EMS and Hospital Use
Advantages of the CPAP System:

• Demand flow system with very little wasted oxygen
• Two oxygen levels - 65 or 100%
• Calibrated CPAP control
• Manometer to monitor patient pressure and effort
• Low patient Work of Breathing (WOB) with peak flow to 140 L/min
• Compatible with all CO2 monitoring systems - mainstream or side stream
• Allows in-line medication nebulization
• Approved for non-invasive or invasive application (ET Tubes or other altenative airways)

EPV100 Ventilator

Item # EPV100: Ventilator
Item # L599-190: Circuit without mask
Item # L599-140: Circuit with mask

The EPV100 is a gas powered, electronically controlled vent that is easy to use, and is equipped with independent inspiratory time, tidal volume, and BPM controls. Features include a built in digital manometer and a full array of visual and audible safety alarms.

EPV200 Ventilator      New Item

Item # EPV200: Ventilator

Now with assist control ventilation!

AutoVent 2000 & 3000

Item # L460: AutoVent 2000
Item # L461: AutoVent 3000

The AutoVent 2000 & 3000 use state of the art pneumatics to assure reliable, time-cycled, constant flow ventilation powered by a minimum of source gas. Each AutoVent is accompanied by the proven LSP Patient Valve, built-in pressure limit alarm and IMV providing gas flow for spontaneously breathing patients.

Bronchotron

Item #F00038

A multi-mode ventilator that integrates HFV/CMV ventilation either alone or in combination with the added feature of precise I:E control for CMV.
For more information: see Percussionaire

Oscillatron®

Item #F00036-2

The Oscillatron® Servo is a Bi-Phasic (push-pull) Oscillator that can attach to a host ventilator to provide HF ventilation. The patented Oscillatron canister powered by the Percussionaire® Phasitron® allows the operator to set frequency and i:e ratio. A built-in frequency counter and manometer display a set rate and mean airway pressure.

Lifecare Pressure Alarm

Item #23001: Complete
Item #34003: Remote Alarm
Item #34046: Remote Stand
Item #34910: 50 ft. Cable
Item #34913: 300 ft. Cable
Item #34915: 100 ft. Cable

This pressure alarm works in line with any pressure situation including ventilation. It works with 9 volt battery and/or AC adapter. A remote box allows the alarm to be transmitted up to 300 ft. from the source.

GioFlex Support Arm

Item #00-392-L (21" OR Table Clamp)
Item #00-392-S (18" OR Table Clamp)

The GioFlex Support Arm allows for connection to the ventilator, siderail or bed to allow more flexibility in circuit support. Four tapered openings are provided to hold breathing circuit tubing (15mm, 22mm, coaxial and others) as well as two smaller restraints for IV, BP or oximeter tubing. Approx. 30 inches in length.

TBird, Vela, Avia Stand

Item #MSPSTAND

This coated metal stand comes with support arm brackets, tank holders and blender brackets. Can be custom fitted to many other ventilators as well. Priced much less than the manufacturers' stands.