Spirometry Devices and Supplies

SPIROMETRY DEVICES AND SUPPLIES

Spirometers Disposable Spirometers Mouthpieces

Noseclips Dosimeters Flow Sensors

Spirometers

Manufacturer

Creative
BioMedics

WinDX Spirometer WinDX™ Spirometer

Item #CBI1702

Features:

Customized Printouts
High Processing Speed
Network Compatible
Unlimited Patient Storage
Instant Trend Analysis

Instant Quality Control
New Incentive Screens
Sensor Auto-Zeroing
Pre- and Post-Bronchodilator Testing

Return to Top

Measurement Device:	Fleisch Pneumotachometer (unheated)	BTPS Temperature Correction:	Automatic, accurate to 1 degree C
Flow Range:	-12 L/Sec to +18 L/Sec	Sensor Dimensions:	6.5 in x 5 in x 3 in (16.5cm x 12.7cm x 7.6cm)
Volume Range:	-12 L to +14 L	Sensor Weight:	1.25 lbs (0.57 kg)
Flow & Volume Accuracy:	+/-2% Resolution to 0.008 L/Sec	Standard Compliance:	ATS, ECCS, SSD, OSHA (COTTON DUST) CE, UL, ISO 9001/EN46001
Sampling Rate:	100 samples per second (4096 byte resolution)	Computer Requirements:	Windows 95/98/NT, 16 MB RAM, 800x600 Display (1024x768 preferred), serial port, parallel printer port.
Database:	Microsoft™ ACCESS compatible	Printer Support:	Most Windows compatible printers
Test Storage:	Unlimited (average usage approximately 6 Kbytes per patient per session); 30 sec per test	Warranty:	Two-year parts and labor, Two-year extended warranty coverage is available at a nominal charge.
Calibration:	3.00 L Creative BioMedics Calibration Syringe

Reliant I® Spirometer

Item #CBI1704

Features:

F/V loop displayed on Graphical Touch-Screen Interface
Full-page reports print directly to standard printer
Fast charging, long-life battery
Easy calibration using 3-Liter syringe
NHanes III normals including FEV 1:FEV 6 ratio

Optional Reliant I® Windows™ software for data transfer and storage
Meets ATS and ERS requirements
Trend Analysis Reports (Printable)
Pulse Oximetry capabilities
Multiple languages
Auto switch-off

Return to Top

Measurement Device:	High-quality Pneumotachograph	Calibration:	3.00 L Creative BioMedics Calibration Syringe
Size:	5.9 x 3.7 x 1.6" (HxWxD)	Measuring Range:	PEF 0.1 - 16 l/s FEV1 and FVC 0.1 - 8 l
Weight:	7.4 ounces including battery	Resolution:	< 5ml; PEF 5 ml/s FEV1 and FVC 1 ml
Battery:	3.6 V, 1200mA (rechargeable)	Accuracy:	PEF ±3% / 0.4 l/s FEV1 and FVC ±3% / 0.05 l
Operation:	Approx. 10 hours of continuous operation	Resistance:	Max. 2 kPa at 15 l/s Max. 1.36 cmH2O/l/s at 15 l/s
Interface:	Serial (RS232)	Standard Compliance:	ATS, ERS, CE, UL, ISO 9001/EN46001
Storage Capacity:	Up to 128 tests including curves for 40 different patients	Printer Support:	PCL Compatible Printer (e.g., HP Deskjet Series)
Database:	Microsoft™ ACCESS compatible	Warranty:	One-year parts and labor

SDI
Diagnostics

For more information:
www.sdidiagnostics.com

Spirolab II

Item #29-1015

Turbine driven Spirometer allowing portability at the bedside for the following parameters: FVC, FEV1, FEV1%, FEV6, FEV1/FEV6%, PEF, FEF 25-75%, FEF 25%, FEF 50%, FEF 75%, FET, Vext, PIF, FIVC, FIV1, FIV1%, VC, IVC, ERV, IC, VT, VE, BF, Ti, Te, Ti/Ttot, VT/Ti, MVV. Meets ATS & ERS Standards. Has 60 min. battery. Will print to thermal printer included or optional external printer.

Astra 100™

Item #29-5100 Replacing SB Office

Turbine driven spirometer now with USB adapter port for printer. FVC, FEV1, FEV6, FEV1/FVC, FEV1/FEV6, PEF. Power Supply: 2 x 1.5DC Alkaline or NiMH batteries.

Astra 200™

Item #29-5200

AccuFlo™ bidirectional digital turbine spirometer is designed to offer multiple spirometry test functions. Measures over 40 parameters of FVC, VC and MVV. Has standard USB connection to PC and printer.

Astra 300™

Item #29-5300

The touchscreen AccuFlo™ digital turbine spirometer makes it easy. Measures accurately your choice of up to 40 spirometry test parameters. Standard USB connection to PC and printer

Return to Top

Creative
BioMedics

Clear Advantage Filters

Item #CBI1501
Item #CBI1502
Item #CBI1503

All but eliminate the possibility of cross contamination with the "Clear Advantage™" filtering device. Designed and manufactured by Creative BioMedics, it gives users reassurance that 99.99% of all air contaminates will be removed. Using a revolutionary "Drum" design with an electrostatic filter media makes this possible. Measurements imagery show airflow resistance a meager .16cm-H20/L/sec. The "Clear Advantage™" filter fits on all models of pulmonary function testing systems. The units are certified by CE and ISO 9001/EN 46001 and are three times more efficient than ATS specifications.

Bacterial removal efficiency: 99.99%
Viral removal efficiency: 99.90%
Made with Recyclable Plastic materials
Built-in cardboard mouthpiece for patient comfort
Concave structure vastly minimizes dead air space
No "pins" or "fins" to obstruct flow or cause turbulent air flow
Ultrasonic weld and quality construction ensures a reliable seal
Low dead space (54 ML) critical for use in advanced pulmonary mechanics and diffusion testing
Low resistance assures compliance with ATS standards (even when saturated with water vapor)
Angled input port allows the cardboard mouthpiece to be removed and replaced with a rubber "Bite Adaptor" for use in Pulmonary Diffusion Tests

SDI
Diagnostics

Pulmoguard I Filter Pulmoguard II Pulmoguard
I & II Filters

Return to Top

Item #29-7950-050, Pulmoguard I (blue)
Item #29-7920-050, Pulmoguard II (green)
Packed 50/case
PFT filters with 99.99% efficiency, less than 70 ml deadspace and clear easy to see material

Disposable Spirometers

Manufacturer

Salter Labs

Disposable Spirometer Complete
Disposable
Spirometer

Item #6600
25 or 50 per case

Return to Top

Salter Disposable Spirometer is used at the bedside to accurately measure pulmonary variables associated with screening, monitoring and weaning patients. Because of its unique design, Salter Disposable Spirometer replaces the less efficient and non-disposable equipment usually associated with respiratory care. It is neither temperamental nor expensive as are many other volume collection devices. With the Salter Disposable Spirometer, the clinician can easily and repeatedly monitor life support system volumes, screen patients for therapy and have an effective means to wean patients by accurately tracking the physiologic parameters. The Salter Disposable Spirometer can be used to determine the following pulmonary data on most patients: VT, VE, VC, FVC, VC/FVC. End Tidal Sampling, Inspiratory and Expiratory Pressures and even mean expiratory flow can be estimated by using a stop watch. Universal adapters permit the above to be measured via mouth, Endotracheal Tube, Tracheostomy Tube, Intermittent Positive Pressure Breathing Machine (IPPB) or Ventilator Manifold and Tubing.

Mouthpieces

Manufacturer
Creative BioMedics	One-Way Valve Mouthpiece Item #CBI1511 The One-Way Valve is a cost-effective disposable device for Spirometry testing. Its unique design features a dual-sized cardboard mouthpiece that accommodates both adults and pediatrics. For adult usage, it combines a 30mm diameter cardboard outer tube that can be reduced to 21mm diameter tube for Pediatric use.

SDI Diagnostics	Comfit Reusable Mouthpiece Item #29-7720-010: Packed 10/case Item #29-7720-030: Packed 30/case Autoclaveable mouthpiece with an exceptional seal while still maintaining patient comfort. Center support prevents airflow restriction. Latex-free
	Comfit Disposable Mouthpiece Item #29-7710-025: Packed 25/case Item #29-7710-050: Packed 50/case A low-cost alternative to existing rubber mouthpieces. Leak proof seal for better test results. Center support prevents airflow restriction. Latex-free.

Noseclips

Manufacturer
Vacumetrics	"Snuffer" Noseclips Item #1008 Has foam padding for patient comfort. Pack-100/box Reusable dispenser box free with 5 or more boxes purchased.
SDI Diagnostics	The "Klip" Noseclip Item #29-7966 Foam padded noseclip Pack-200/box
Return to Top

Dosimeters

Manufacturer

Salter Labs

Dosimeter for Bronchial Provocation Delivery

Item #0700: 5' high pressure hose
Item #0700-10: 10' high pressure hose

Return to Top

Features:

Adjustable pulse duration 0.1 to 9.9 seconds
L.E.D. diode display
Both manual and remote activation switch
Front panel controls and indicators
Operates from 50 psi source or compressor. Requires DC power source
Compatible with all pneumatic nebulizers

Benefits:

Versatile, variable, and precise timing
Positive visual indication of operating status
Ensures delivery occurs at inspiration for a precise, pre-set period
Affords easy operation
Easily powered by readily available energy sources
Versatile, convenient

Flow Sensors

Manufacturer
SDI Diagnostics	FloSense II Disposable Pneumotach Item #29-8040-050: Pack-50/case Item #29-8040-250: Pack-250/case Replacement sensor for the Puritan Bennett Renaissance II Spirometer. Has the same performance at a lower price. Each unit does come with the code to enter into the Renaissance spirometer for calibration and accuracy.

Return to Top	FloSense I Disposable Pneumotach Item #29-8010: Pack-50/case Item #29-8012: Pack-250/case Item #29-8020: Bidirectional, Pack-25/case Item #29-8021: Bidirectional, Pack-100/case Replacement sensor for the Puritan Bennett Renaissance I Spirometer. Has the same performance at a lower price. Each unit does come with the code to enter into the Renaissance spirometer for calibration and accuracy.

Please Note: Items found in each category are not inclusive. If you are searching for a particular item and cannot find it within our sales pages, please call us at 800-226-3783. For a quote from your representative, please see our Contact Us page and choose your representative.