Medical Support Products

Home
Sales
Rental
Service
Used Equipment
What's New
Feedback
Contact
Education
About Us

OXYGEN MONITORING


Analyzers
Manufacturer
 

Precision
Medical

New Item

MonitorMonitor Accessories

Oxygen Monitor

Item #PM5900

External oxygen monitor with alarms for high/low FiO2, sensor and low battery. Has a quick response time and long battery life (2000 hrs continuous use). Accuracy to ± 3%.

  Accessories:
Item #505014 - Horizontal Pole Mount
Item #505189 - Wall Mount
Item #505013 - Vertical Pole Mount
Item #505126 - T Piece
Item #504937 - Coil Cable
Item #504877 - Oxygen Sensor
Item #505344 - Diverter
     
Maxtec

Max 02 Plus

MAXO2 Specifications

MAXO2+

Item #R217P62 (Internal Sensor)
Item #R217P72 (External Sensor)

  • Comes equipped with a two year warranty on both analyzer and sensor
  • One-touch calibration, with reminder
  • Long battery life (Approx. 5,000 hrs)
  • Impact resistant & drip proof
  • ±3% Accuracy
  • 2 AA Batteries
  • Galvanic Fuel Cell (MAX™-250)
 

HandiHandi LanyardHandi®+ Medical & Handi® Lanyard

Item #R218P12 (Left Photo)

Item #R213P92 (Right Photo)

Return to Top The Handi®+ is the #1 choice for convenience and portablility with the oxygen analyzer and sensor all-in-one. Disposable. Typically lasts up to four years. 3 digit LCD Display, Overmold for extra protection, One week calibration reminder, Simple - Reliable - Affordable, Pocket Sized, 24 Month Warranty, CE
   
 

Oxygen MonitorOM-25 ME & MEL Oxygen Monitor

Item #R213P05: Oxygen Monitor alarm
Item #R213P65: Oxygen Monitor low limit alarm

OM-25 ME Manual

Return to Top

Oxygen AnalyzerOM-25AE Oxygen Analyzer with External Sensor

Item #R213P10

Discontinued - Replaced by MAXO2+

OM-25 AE Manual

 

Oximeters

Manufacturer
 
Maxtec

OximeterMD300 C3 Finger Oximeter

Item # R204P19

The Choice Med MD300 C3 Finger Oximeter's compact design allows it to be used for pediatric and adult applications.

Data Sheet

 
  • Displays SpO2, pulse rate and SpO2 wavelength
  • Pulse rate tone modulation function
  • Displays signal strength
  • Multi-directional screen display modes
  • Low battery indicator
  • Adjustable brightness
  • Auto-off function
  • Lanyard included with purchase
  • Additional information - maxtecinc.com
   
Maxtec

Pulsox-2Pulsox-2

Item #R204P12

Portable Spot Check Oximeter featuring motion artifact technology
24 month warranty

Specifications

   
Return to Top

Pulsox-300iPulsox-300i

Item #R204P18: Includes Profox Software
Item #R204P18-001: No Software

Portable Spot Check or Overnight recording Oximeter with Profox Software. High-resolution memory, Stores up to 300 hours, Download via USB, Lightweight, Compact body, Long battery life, 1 AAA battery (30 hrs continuous use), Size: 2.68" x 2.28" x .59", Weight: 56g
Pulsox 300i Data Sheet
Pulsox 300i Comparison
About Pulse Oximetry

 

Spot Check ProbePulsox-300 Series Spot Check Probe

Item #R124P51: Model MAX-SP-5C

18 inch cord

Return to Top

ProbePersonal Probe

Item #R124P53: Model MAX-SD-5C

Universal and Neonatal Applications

   
Datex-
Ohmeda

TuffsatTuffsat Oximeter

Item #6051-0000-160: Yellow
Item #6051-0000-187: White
Item #6051-0000-186: Pink
Item #6051-0000-185: Blue

The TuffSat Hand-Held Oximeter provides exceptional visibility with large SpO2 values and a backlit display for low light conditions. If documentation is required, the TuffSat has an infrared link (IR) to an optional external Hewlett-Packard printer. Datex-Ohmeda's patented TruTrak data sampling provides for consistent, accurate SpO2 readings, even during patient motion and low perfusion.

   
Return to Top

TruSat OximeterTruSat Oximeter

Item #6051-0000-191: Yellow w/download software
Item #6051-0000-190: Yellow w/o download software
Item #6051-0000-193: White w/download software
Item #6051-0000-192: White w/o download software

Portable Oximeter offering Datex patented TruSignal technology for accurate monitoring. 48 hours of trending with downloading software provided.

   

Smiths-Medical

BCI

Digit Finger OximeterBCI® Digit® Finger Oximeter
Under $350.00

Item #3420Y: Yellow
Item #3420G: Gray

The Digit® Finger Oximeter is a pulse Oximeter and Sensor in one unit providing fast reliable SpO2 pulse rate and pulse strength measurements on patients from pediatric to adult. It's pocket-size with a large LED display, one button keypad and auto power shutdown after 8 seconds when not in use, makes it ideal for emergency, hospital or clinical environments or for home use.

   
 

Hand-Held Pulse OximeterHand-Held Pulse Oximeter

Item #3303

Cost-effective, portable, continuous, or spot check pulse oximetry monitoring system with alarms and an internal rechargeable battery. Clinician, Home-Use and Sleep Study modes make it ideal for use in the hospital or clinical environment; during emergency air or land transport; or for in-home use.

   
Return to Top

MiniCorr Hand-Held OximeterMiniCorr Hand-Held Oximeter

Item #3402

The MiniCorr Digital Hand-Held Pulse Oximeter provides SpO2 and pulse rate monitoring on patients from neonate to adult. The device is battery or AC powered, has adjustable alarm limits, as well as visible and audible alarm signals, and an infrared link to a printer (catalog #8411). An optional rubber boot is also available for added protection. The digital technology utilized in this monitor enhances the ability of the device to detect pulse readings in difficult environments. Ideal for use in home care and clinical settings, as well as during sleep screening.

   
 

FingerPrint Hand-Held OximeterFingerPrint® Hand-Held Oximeter with Printer

Item #3401-000

The FingerPrint® Sleep Hand-Held Pulse Oximeter with built-in Summary Printer was specifically designed for sleep screening studies in the sleep lab, clinical environment or home. With its easy-to-use 2-key operation, it also provides fast, reliable spot-checking measurements of SpO2 pulse rate and pulse strength for use in clinical or hospital environments.

   
 

Oximetry Data Management SysOximetry Data Management System

Item #1621: Complete System (includes 1 #3389 Interface Cable)
Item #3389: Interface Cable

The BCI® Oximetry Data Management Program is a Windows® based, easy-to-use software for use with the FingerPrint® Sleep Hand-Held Pulse Oximeter. Using the Smiths Medical PM, Inc. catalog #3389 Interface Cable, it rapidly downloads information collected during sleep screening, oxygen therapy validation and/or related studies, and assists in the Clinician's interpretation by analyzing SpO2 data, and storing and printing Statistical, Desaturation and Graphic Reports.

   
Return to Top

3180 Pulse OximeterBCI® 3180 Pulse Oximeter

Item #3180

The BCI® 3180 Pulse Oximeter is a cost-effective, stand-alone monitor that delivers fast, reliable SpO2 pulse rate and pulse strength measurements of patients from neonate to adult. This AC or battery powered unit displays a plethysmographic waveform, high and low alarm limits and up to 30 hours of on-screen trended data for all parameters.

   
 

Autocorr Pulse OximeterAutocorr® Pulse Oximeter

Item #3304
Item #3304LS: with Loud Alarms

The Autocorr® Pulse Oximeter with SAC (Serial Autocorrelation) Technology uses refined hardware and unique patented software to extract SpO2 pulse strength and pulse rate data in a new way. This cost-effective compact monitor incorporates clinical, home and sleep study functions as standard features, and a data log or trend printout of stored information is available when used in conjunction with a printer or computer.

   
Return to Top

Autocorr Plus Pulse OximeterAutocorr® Plus Pulse Oximeter/ECG/Respiration Monitor

Item #3404

The Autocorr® Plus, the fourth in the Clarity® Series is a cost-effective, versatile pulse oximeter/ECG/Respiration Monitor, with 3 or 5 lead ECG, pace detect/reject, digital oximetry with SAC (Serial Autocorrelation) technology, and respiration. A high-resolution electroluminescent screen display provides two user configurable traces. An optional recorder (Smiths Medical PM, Inc. catalog #3408) provides for high-resolution graphics printing. Use as a stand-alone device or combine with any of the other Clarity® Systems for multi-parameter monitoring.

O2 Sensors Critical Care

Manufacturer
 

Maxtec

 

 

02 SensorReplacement O2 Sensor
for Maxtec OM25A Oxygen Analyzer

Item #R125P01-002: Internal Sensor
24 month warranty

Reference Chart

 

O2 SensorReplacement O2 Sensor
for Maxtec OM25ME and Maxblend

Item #R125P03-002: External Sensor
24 month warranty

Reference Chart

Return to Top

O2 SensorReplacement O2 Sensor
for Draeger Babylog, Evita Ventilators

Item #R113P06: Dual Cathode
12 month warranty

Specs
Reference Chart

 

Replacement SensorReplacement O2 Sensor
for Siemens 300 and 900 Series Ventilators

Item #R109P45
14 month warranty

Specs
Reference Chart

 

O2 SensorReplacement O2 Sensor
for Mallinckrodt/PB 840 Ventilators

Item #R114P70
24 month warranty

Specs
Reference Chart

Return to Top

02 SensorReplacement O2 Sensor
for Teledyne T7, TED60T, TED191, TED200T7 Analyzers

Item #R116P10
12 month warranty

Specs
Reference Chart

Replacement O2 Sensor (Anesthesia)

Manufacturer
 
Maxtec

O2 SensorAnesthesia O2 Replacement Sensor
for Criticare

Item #R116P30
12 month warranty

Specs
Reference Chart

 

Anesthesia O2 Replacement SensorAnesthesia O2 Replacement Sensor
for Draeger Narkomed Series

Item #R107P20
18 month warranty

Reference Chart

 

 

Anesthesia O2 Replacement SensorAnesthesia O2 Replacement Sensor
for Datex/Ohmeda Anesthesia Machines

Item #R113P90
12 month warranty

Reference Chart

Return to Top

Anesthesia O2 Replacement SensorAnesthesia O2 Replacement Sensor
Long-life sensor for Datex/Ohmeda Anesthesia Machines (For external applications only. Large sensor replaces O2 assembly cap and sensor)

Item #R107P22
18 month warranty

Specs
Reference Chart

Please Note: Items found in each category are not inclusive. If you are searching for a particular item and cannot find it within our sales pages, please call us at 800-226-3783. For a quote from your representative, please see our Contact Us page and choose your representative.