Medical Support Products

Vapotherm Precision Flow

• Item #PF-Unit-US
• The Precision Flow™ is a system for high flow humidified respiratory therapy by nasal cannula. It incorporates the Vapotherm core humidification technology with an electronic blender and flow controller. The water and gas pathways are both incorporated into a removable, disposable patient circuit. The only cleaning and disinfection required is wiping the housing with an approved disinfectant wipe after use.

Disposable Patient Circuits
For Precision Flow Unit

• Item #PF-DPC-High: High Flow Disposable Patient Circuits
• Item #PF-DPC-Low: Low Flow Disposable Patient Circuits
• Pack-5/case
• The disposable patient circuit is comprised of the disposable water path, vapor transfer cartridge and delivery tube.

Vapotherm Precision Flow Pole Stand

Item #VAP-0001-60

Vapotherm Base Unit

The Vapotherm 2000i is a respiratory therapy device that allows high flows of breathing gases to be delivered by a narrow tube such as a nasal cannula or trans-tracheal cannula, using patented membrane technology to warm and saturate the gas stream. The Vapotherm™ system is defined by its ability to deliver breathing gases ideally conditioned (i.e. molecular water vapor, sterile, saturated but without condensation) at high flows at or above body temperature. This concurrence of attributes --flow, humidity and warmth-- permits treatment of a broad range of indications.

For More Information

High Flow Vapor Transfer Cartridge

• Item #VT01-AS
• Pack-12/case or may be purchased as each
• This patented technology allows molecular water vapor to pass into the gas stream but prevents direct contact between water source and breathing gas. The cartridge effectively blocks bacteria and particles greater than .01 microns.

Low Flow Vapor Transfer Cartridge

• Item #VT01-BS
• Flows from 1-8 lpm
• Pack-12/case or may be purchased as each
• This patented technology allows molecular water vapor to pass into the gas stream but prevents direct contact between water source and breathing gas. The cartridge effectively blocks bacteria and particles greater than .01 microns.

Delivery Tube Set

• Item #DTPV9007: 7 ft Delivery Tube without Cannula
• Item #DTPV9007-CA2: 7 ft Tube with Adult Cannula
• Item #DTPV9007-CP2: 7 ft Tube with Pediatric Cannula
• Item #DTPV9020: 20 ft Tube without Cannula
• Pack-20/case,
  (DTPV9020 - Pack-10/case)
  All may be purchased as each
• The Vapotherm System eliminates the need for heated wire circuits. It simply requires a proprietary single patient use delivery tube.

Oxygen Cannulas

• Item #MA1700: High Flow Adult Cannula
• Item #MN1100A: Premature Cannula
• Item #MN1100B: Neonatal Cannula
• Item #MI1300: Infant Cannula
• Item #MI1300B: Intermediate Infant Cannula
• Item #MP1500: Pediatric Cannula
• Pack 25/case or may be puchased as each
• Vapotherm has a series of special cannulas designed to optimize the 2000i system, providing patient comfort and preventing rain-out.

Tubing Adapter

• Item #TA-22: 22mm Tubing Adapter
• Pack-50/case or may be purchased as each
• The 22mm tubing adapter connects the delivery tube(s) DTPV9007 to a 22mm interface such as a tracheostomy mask.

Spike Set (New)

• Item #VSS-1
• Pack-20/case or may be purchased as each
• The spike set allows any prefilled IV sterile water bag to continuously fill the Vapotherm System.

Hospital Compressor Kit

• Item #HCK-100
• Vapotherm's new compressor allows for use of unit where no air source is available. Extremely quiet and light, made especially to work with the 2000i. Includes compressor, 3-25 lpm flowmeter and pole plate.

Home Care System

• Item #HCK-200-HF
• The Vapotherm HCK-200-HF contains all elements necessary for use of the system in the home environment. Utilizing our compressor, air can be blended with an oxygen source to deliver high flows in the home. Contains compressor, pole stand, 3-25 lpm flowmeter and tubing.

Y Adapter

• Item #BLY-2000C
• With Check Valves
• Allows for blending of air and oxygen

Custom Flowmeter

• Item #FM-40: Click Style Flowmeter
• 10-40 lpm

Custom Flowmeter

• Item #FM-8: Click Style Flowmeter
• 1-8 lpm

Disinfecting Kit

• Item #DK-301
• Pack-15/case or may be purchased by each
• Contains cartridge by pass tubing, disinfection tube, yspike adapter, disinfection bags

Schuco Air Compressor/Nebulizer
Item #SC3000
9 lpm at Nebulizer Cup

Features damage resistant plastic, recessed tubing connector and a 5-year warranty

CAM4 Mist Tent System
Item #T16393: Mist Tent Complete with Compressor
Item #T15100: Mist Tent Complete without Compressor
Item #T6308: Tent Only

Thermoelectric cooling (no harmful CFCs). Adjustable height from 66 - 83 inches. Heat is absorbed on one side with cooling produced on the other.

Gibeck Humid-Flo HME
Item #19912

The Gibeck Humid-Flo is a disposable Heat & Moisture Exchanger (HME) designed to remain in-line during medicated aerosol treatments given to the mechanically ventilated patient. This novel device has two operating modes, HME and AEROSOL, which are enabled by rotating the blue collar. When the HME mode is selected, a green block with the letters "HME" will appear in the window and the Humid-Flo will now operate as a Heat & Moisture Exchanger. When AEROSOL mode is selected, a white box with "AEROSOL" will appear in the window. In this mode, the HME element is bypassed and a center passageway is exposed allowing the delivery of aerosolized medication.
Selling primarily to the subacute and homecare market.