This Oxygen Monitor has an expanded alarm range of 15%-99% for the low alarm and 16%-100% for the high alarm. The monitor has a shock resistant exterior and an clear screen for easy reading. The controls are uncomplicated and user friendly. You can rely on the accurate unit at +/-3% accuracy.
| Dimensions (Monitor without cable and sensor attached) |
Length: 1.7 in (4.4 cm)
Width 3.6 in (9.0 cm)
Height: 5.4 in (13.8 cm)
Cable Length (fully extended): (3.1 m)
|
| Weight: |
1.11 lbs (0.50 kg) (including Oxygen Monitor, Sensor, Batteries
and Cable Weight)
|
| Operating Conditions: |
Temperature: 50°F to 113°F
(10°C to 45°C)
Altitude: Sea Level to 8,000 ft/2438 m
|
| Power Requirements: |
4 AA Alkaline Batteries (4 x 1.5=6 Volts)
|
| Battery Life: |
Approximately 2,000 hours continuous use non-alarm condition |
| Diverter Fitting: |
15 mm "T" adapter |
| Measurement Range: |
0.0 - 100% Oxygen |
| Accuracy & Linearity: |
+- 1% of full scale at constant temperature, relative humidity and pressure when calibrated at full scale |
| Total Accuracy: |
+- 3% actual oxygen level over full
operating temperature range |
| Response Time: |
90% of final value in less than 12 seconds
at 77°F (25°C) |
| Low Battery Indication: |
"LO BATTERY" message displayed and audible alarm |
| Low Alarm Range: |
15% - 99% Oxygen |
| High Alarm Range: |
16% - 100% Oxygen |
| High Alarm De-Activation Setting: |
Above 100% ("---" will appear ) |
| Sensor Type: |
Galvanic Oxygen Sensor (fuel cell) |